產品名稱：自動投粉系統

自動投粉系統的發展勢不得擋，其投粉系統是可不斷性的環保性送粉系統，這也是國家比擬發起的一種中央供料系統方式。

因此，各個送粉系統設備公司也大概捉住該機緣，注重技能研制跟立異，優化公司鏈，如今是知識科技大爆炸的時代，只有科技進步才能跟上時代的腳步，適應市場的需求。 

自動投粉系統------經濟實用，投資成本低 大型供料系統 ------**穩定，后期成本低

 自動投粉系統簡介： 供粉系統是指將所有旋風分離器（或原料接收設備）與真空泵及控制系統通過管路及電路連接起來。

  投粉系統由真空泵、原料桶、帶真空截止閥的上料機、成型設備、原料管路和真空管路 （有些系統還包括中央落地集塵器），以及智能控制卡控制系統組成。

       送粉系統可以將原料從指定的位置通過真空管路分配到成型設備。其中，各種設備的擺放有一定規律可循：真空泵和原料桶總是放置在車間的兩端，可使與真空泵和原料桶距離不同的各臺上料機的吸料能力相互協調，保持一致。

 v 中央集塵器采用食品級304鏡面不銹鋼，美觀、易清潔、永不生銹。 
v 在物料接收器中放置篩網，采用中央集塵器，便于清潔； v 采用濾袋振動系統。通過不銹鋼濾袋振動器的上下振動，濾袋中的粉塵被振出，并垂直下落；無需采用大量的壓縮空氣，能夠節省能源和阻止含濕的壓縮空氣接觸物料。
 v 分料站采用食品級304鏡面不銹鋼，美觀、易清潔、永不生銹。 自動換料系統采用智能控制器控制；可滿足每臺機組應用每種原料的需求。
 v 管路清潔閥采用食品級304鏡面不銹鋼，美觀、易清潔、永不生銹。
 v 在每次吸料結束時清潔管路；避免由于原料流動性差而造成的管路堵塞，使系統**性更強；
 v 采用的直線回路不會減慢管路中的上料速度，相對于采用的活塞式真空 阻隔方式相比，三鼎的擋板式開合比活塞元件耐用，無需每隔三個月更換橡膠件。
 v 采用食品級304鏡面不銹鋼，美觀、易清潔、永不生銹。
 v 在每次吸料時為了避免管路由于原料流動性差而造成的管路堵塞，使系統**性更強

 v 除了具有一般大型室外料倉外，還獨有Silmo型模塊式料倉。
其特點為： v 價格只是大型料倉的十分之一 v 模塊式的安裝，實現料倉容量的變化 v 可安裝于室內 v 適用于生產量大的工廠 
v 采用螺桿，體積式上料，上料速度稍慢 v 中央供粉系統中，可將備件泵用于模具中水的清理，當換模具時可避免水存留在里面以防腐蝕。
 v 僅需填加一條與清潔管路相連接的真空管路及相應的清潔單元即可將備件泵用于工作區的清潔。

        自動投粉系統所需制作報價的基本數據: v 每臺成型設備的間距和原料吸入點的距離 v 
原料儲存區的確切的位置 v 每臺成型設備每小時對原料的消耗量 v 原料的種類 v 管路允許通過的高度 v 
客戶是否在車間安裝了吊車 中央供料系統的輸送原理 中央供粉系統是實現原料的集中干燥，除濕，計量，攪拌集中處理，封閉輸送，徹底避免車
間噪音，灰塵，熱氣污染原料浪費。 供料系統的中央輸送方式是通過中央真空風機、中央濾塵器、真空料門原料儲存設備以及相對應的干燥設備、配色設備和粉碎回收裝置結合而成，可以實現多種原料的集中處理，依靠中央微處理控制、監測系統將原料自動輸送給多室相應的注塑加工設備使用。
          具有以下特點：高效 原料的干燥、配色、粉碎回收料利用實現高度的自動化控制和監控，且能滿足24小時不停機的生產需要。 供料系統節能操作簡單、減少大量勞動力，減少原料袋和輔助設備提供更多空間，應用中央處理和減少單機設備節省電能及維護費用;個性化 按照不同用戶、車間、原料的設計出*優化的方案;現代化工廠形象 使原料及粉塵對注塑生產區的污染減至*低，并降低噪音，實現無人化的自動化生產。

自動投粉系統是實現原料的集中干燥，除濕，計量，攪拌集中處理，封閉輸送，徹底避免車間噪音，灰塵，熱氣污染原料浪費。 
供料系統的中央輸送方式是通過中央真空風機、中央濾塵器、真空料門原料儲存設備以及相對應的干燥設備、配色設備和粉碎回收裝置結合而成，可以實現多種原料的集中處理，依靠中央微處理控制、監測系統將原料自動輸送給多室相應的注塑加工設備使用。 
          供粉系統具有以下特點：高效 原料的干燥、配色、粉碎回收料利用實現高度的自動化控制和監控，且能滿足24小時不停機的生產需要。
 

供料系統節能操作簡單、減少大量勞動力，減少原料袋和輔助設備提供更多空間，應用中央處理和減少單機設備節省電能及維護費用;個性化 按照不同用戶、車間、原料的設計出*優化的方案;現代化工廠形象 使原料及粉塵對注塑生產區的污染減至*低，并降低噪音，實現無人化的自動化生產。
集中送粉系統是什么樣的效果？ 

      加粉系統是實現原料的集中干燥，除濕，計量，攪拌和機邊粉碎機立卻回收集中處理，封閉輸送，徹底避免車間噪音，灰塵，熱氣污染原料浪費。解決原料重復人工搬運的高成本及因疏忽而產生干燥不完全的缺料的問題，更不會混入不被允許的其它材料，*重要的是降低采購、耗電、維修成本，提高產品質量，提高工作效率。 迅速發展的塑膠生產自動化是一種應用十分廣泛的現在先進科學技術。它的發展水平和普及程度是一個國家工業發展水平的重要標志。要在競爭日益激烈的市場，一個很重要的方面自動化生產能降低人工提高產品合格率，節約能源減少生產成本。

加粉系統方案圖：

Automatic powder system development is bound to block, the automatic powder system is a constant environmental protection of the powder delivery system, which is more than the country launched a central feeding system.

Therefore, the various powder delivery system equipment company also probably catch the opportunity, focus on skills development with innovation, optimize the company chain, is now the era of knowledge and technology big bang, only scientific and technological progress to keep up with the pace of the times to meet the needs of the market.

Automatic powder system ------ economical and practical, low investment costs Large supply system ------ safe and stable, low cost of late

 Automatic powder system Introduction: The powder supply system refers to all the cyclone separator (or raw material receiving equipment) and the vacuum pump and control system through the pipeline and circuit connected.

  The powder system consists of a vacuum pump, a raw material bucket, a feeder with a vacuum shut-off valve, a molding machine, a raw material line and a vacuum line (some systems also include a central floor dust collector), and a smart control card control system.

       The feed system allows the feedstock to be dispensed from the specified location through the vacuum line to the forming equipment. Among them, a variety of equipment placed in a certain order to follow: vacuum pump and raw material barrels are always placed in the workshop at both ends, can be separated from the vacuum pump and the raw material barrels of different feeding capacity of each machine to coordinate Consistent.

 V central dust collector with food grade 304 mirror stainless steel, beautiful, easy to clean, never rust.
V Place the screen in the material receiver, using a central dust collector for easy cleaning; v Use the filter bag vibration system. Through the stainless steel filter bag vibrator up and down vibration, filter bag dust is vibrated, and vertical drop; without the use of a lot of compressed air, can save energy and prevent wet compressed air contact materials.
 V sub-station using food grade 304 mirror stainless steel, beautiful, easy to clean, never rust. Automatic refueling system using intelligent controller control; to meet the needs of each unit application of each raw material.
 V line cleaning valve with food grade 304 mirror stainless steel, beautiful, easy to clean, never rust.
 V to clean the pipeline at the end of each suction; to avoid the poor flow of raw materials caused by the pipeline clogging, the system more secure; v linear circuit will not slow down the pipeline feeding speed, relative to The use of piston-type vacuum barrier compared to the tripod of the baffle-type opening and closing than the piston components durable, no need to replace the rubber pieces every three months.
 V use of food grade 304 mirror stainless steel, beautiful, easy to clean, never rust.
 V In order to avoid piping due to poor flow of raw materials caused by the pipeline blockage, so that the system more secure

 V In addition to the general large-scale outdoor silo, but also unique Silmo modular silo.
Its features are: v price is only one-tenth of a large silo v modular installation, to achieve changes in the silo capacity v can be installed in the indoor v for the production of large factories
V with screw, volume loading, feeding speed slightly slower v central supply system, the spare parts pump can be used in the mold of water cleaning, when the mold can be avoided when the water to stay inside to prevent corrosion.
 V Use only a vacuum line connected to the cleaning line and the corresponding cleaning unit to clean the spare parts pump for the work area.

        Automatic powder system required to produce the basic data: v the distance between each molding equipment and raw material suction point distance v
The exact location of the raw material storage area v the consumption of raw materials per hour of each molding machine v the type of raw material v the height of the pipe allowed v
Whether the customer in the workshop to install the crane Central feeding system for the principle of the central delivery system is to achieve the concentration of raw materials, drying, dehumidification, metering, stirring centralized treatment, closed delivery, completely avoid the car
Between the noise, dust, hot air pollution raw materials waste. The central conveying mode of the feeding system is realized by the combination of the central vacuum fan, the central dust filter, the vacuum material raw material storage equipment and the corresponding drying equipment, color matching equipment and the crushing and recovery device, which can realize the centralized processing of various raw materials, Central micro-processing control, monitoring system will automatically feed the raw materials to the corresponding multi-room injection molding equipment used.
          Automatic powder system has the following characteristics: efficient raw materials, dry, color, crushing and recycling materials to achieve a high degree of automation control and monitoring, and can meet the 24-hour non-stop production needs. The fuel supply system is simple to save energy, reduce the amount of labor, reduce the cost of raw materials and auxiliary equipment to provide more space, the application of central processing and reduce the cost of individual equipment to save energy and maintenance costs; personalized according to different users, workshops, raw materials designed to optimize Program; modern factory image to raw materials and dust on the injection molding production area to minimize pollution, and reduce noise, to achieve unmanned automated production. Automatic powder system is to achieve the concentration of raw materials, drying, dehumidification, metering, stirring centralized treatment, closed transport, completely avoid workshop noise, dust, hot air pollution waste material.
The central conveying mode of the feeding system is realized by the combination of the central vacuum fan, the central dust filter, the vacuum material raw material storage equipment and the corresponding drying equipment, color matching equipment and the crushing and recovery device, which can realize the centralized processing of various raw materials, Central micro-processing control, monitoring system will automatically feed the raw materials to the corresponding multi-room injection molding equipment used.
          The supply system has the following characteristics: efficient drying of raw materials, color, crushing and recycling materials to achieve a high degree of automation control and monitoring, and can meet the 24-hour non-stop production needs.
 

The fuel supply system is simple to save energy, reduce the amount of labor, reduce the cost of raw materials and auxiliary equipment to provide more space, the application of central processing and reduce the cost of individual equipment to save energy and maintenance costs; personalized according to different users, workshops, raw materials designed to optimize Program; modern factory image to raw materials and dust on the injection molding production area to minimize pollution, and reduce noise, to achieve unmanned automated production.
What is the effect of centralized feeding system?
      Plus powder system is to achieve the concentration of raw materials, drying, dehumidification, metering, mixing and machine edge grinding machine is centralized recovery, closed transport, completely avoid workshop noise, dust, hot air pollution waste material. To solve the high cost of manual processing of raw materials and negligence due to dry and incomplete problems, but will not be mixed with other materials are not allowed, the most important thing is to reduce procurement, power consumption, maintenance costs, improve product quality, Improve work efficiency. The rapid development of plastic production automation is a very widely used now advanced science and technology. Its level of development and popularity is an important indicator of the level of national industrial development. To an increasingly competitive market, a very important aspect of automated production can reduce the artificially improve the product pass rate, save energy to reduce production costs,