注塑機全自動中央集中控制供料

注塑機全自動中央集中控制供料采用“一臺機器一根管”的設計方式，保證整個系統的空氣對原料進行輸送，防止除濕干燥后的原料回潮。同時在每個輸運行穩定，絕無堵料的現象發生。

什么是注塑機全自動中央集中控制供料是為注塑車間的塑料產品生產而設計的，實現了不間斷無人化連續成型作業。


可根據需要改變原料品種、多顏色材料的組合使用方式，實現著色工序的自動化。系統能夠以全自動方式再生和使用注口冷料，能夠對所有供料設備的控制，
并防止了儲料倉內阻塞現象的發生，通過設置中央監控臺實現全自動化。 


中央集中供料系統采用微機集中自動控制，實現了對粒料的24小時連續供料作業。
多臺小型微機分別控制各臺成型機的著色工藝，計量準確、混合均勻，并可靈活改變顏色，適應對產品的多顏色多品種要求。根據不同成型機的生產量，靈活變更供料量。多個供料管道設計，可保證對主料多樣化的要求。系統具有多種監控及保護功能，工作**可靠。

注塑機全自動中央集中控制供料別名有:集中供料系統、自動送料系統等。 中央供料系統的工作原理 中央供料系統采用真空傳送方式，通過集中的管路系統將塑料原料從儲料罐輸送到中央除濕干燥系統，然后將干燥后的原料輸送到每臺注塑機中。


注塑機全自動中央集中控制供料配合中央除濕干燥系統使用，可使用除濕干燥送循環后會對輸送管線進行清理，確保管路內沒有殘余的粒料，在避免原料回潮的同時，也保證了加入注塑機中的原料性能的一致。


在真空負壓作用下原料中原由的粉塵會通過粉塵過濾系統被過濾出來，有助于提高成型產品的質量。
為什么選擇達安泰注塑機全自動中央集中控制供料？

◆實現全廠加料無人化作業，為企業節省大量人力。

◆配合冷卻水循環系統，自動取出傳送系統，冷熱交換系統和次料回收系統，實現全廠無人化作業，企業可以節省用于空調和電燈等設備所消耗的能源。

◆極大的提高企業的生產效率，降低企業的生產成本。

◆極大的提高產品的品質，降低**率。

◆可以根據需要調整不同的原料，為企業省去很多換料的麻煩。

◆管路不占據地面空間，為企業節省大量的有效空間。

◆走管和擺放美觀，可以有效改善生產車間的環境。

◆費用相對低廉，長遠看為企業節省大量資金。

◆實現封閉管路輸送原料，徹底避免對車間的噪音，粉塵，熱氣污染，是*大限度提高產品質量的*佳系統。

Injection molding machine automatic centralized control of the central feeding system for the use of "a machine a tube" design, to ensure that the entire system of air to transport raw materials to prevent dehumidification after drying raw materials resurgence. At the same time in each transport line is stable, no blocking material phenomenon occurred.

What is the automatic control of the injection molding machine Central centralized control for the injection molding plant is designed for the production of plastic products, to achieve a continuous unmanned continuous molding operations.
According to the need to change the variety of raw materials, multi-color materials, the combination of use, to achieve the color process automation. The system can be fully automatic regeneration and the use of injection of cold material, to all the feeding equipment control,
And to prevent the occurrence of congestion in the storage warehouse, through the establishment of a central control station to achieve full automation. Central centralized feeding system using computer centralized automatic control, to achieve a 24-hour continuous feeding of pellets.
More than a small computer to control the molding machine of each molding process, accurate measurement, mixed evenly, and flexible to change the color, to adapt to the multi-color products and more requirements. According to the production of different molding machine, the flexibility to change the amount of feed. Multiple feed pipe design, can guarantee the requirements of the diversification of the main material. The system has a variety of monitoring and protection functions, safe and reliable work.

Injection molding machine automatic central centralized control supply alias are: centralized feeding system, automatic feeding system. Working principle of the central feed system The central feeding system uses a vacuum conveying method to transport the plastic raw material from the storage tank to the central dehumidification drying system through a centralized piping system and then transport the dried raw material to each injection molding machine.
Injection molding machine automatic centralized control of the supply center with the use of the central dehumidification drying system can be used to dehumidify the drying cycle after the transport pipeline will be cleaned to ensure that there is no residual pellet in the pipeline, to avoid the return of raw materials at the same time, but also to ensure that Adding the raw material in the injection molding machine to the same performance. In the vacuum under the action of raw materials in the original dust will be filtered through the dust filter system, help to improve the quality of molding products.
Why do you choose Diana injection molding machine fully centralized centralized control supply?

◆ to achieve the whole plant feeding unmanned operations for enterprises to save a lot of manpower.

◆ With the cooling water circulation system, automatically remove the transmission system, hot and cold exchange system and sub-material recovery system to achieve the whole plant unmanned operations, enterprises can save for air conditioning and lighting equipment and other energy consumption.

◆ greatly improve the production efficiency of enterprises, reduce production costs.

◆ greatly improve the quality of the product, reduce the non-performing rate.

◆ can be adjusted according to the needs of different raw materials for enterprises to save a lot of trouble.

◆ pipeline does not occupy the ground space for enterprises to save a lot of effective space.

◆ walking and placed beautiful, can effectively improve the production workshop environment.

◆ the cost is relatively low, long-term view for the enterprise to save a lot of money.

◆ to achieve closed pipeline transport of raw materials, to completely avoid the noise of the workshop, dust, hot air pollution, is to maximize the best product quality system.